Call UsToro 7500-D Series 96" (244 cm) 37 HP 1642cc Diesel Rear Discharge (74096)
Zero-Turn Mowers 7500-D Series 96" (244 cm) 37 HP 1642cc Diesel Rear Discharge (74096)
Overview:
Looking for a workhorse mower that’s easy to operate and gets the job done faster? Check out the Toro® Z Master® 7500-D. The highly productive 96-inch deck design folds up neatly for easy transport, then folds down to handle your biggest jobs — in half the time of comparable mowers. It delivers all the speed and maneuv... + Read More
Features
Superior Performance
Powered by a Tier 4-compliant, three-cylinder, 1.6 liter, 37 hp Yanmar diesel engine, this mower is packed with power to tackle the toughest mowing jobs.
The New Standard In Comfort
The floor pan and deluxe suspension seat are iso-mounted to reduce vibration. That results in a better operator experience and more productivity.
Extended Service Intervals
Save on maintenance with extended service intervals and a deck design that uses up to four matching blades. The mower is also backed by a 5-year, 2,000-hour warranty (first two years no-hour-limit).
Contour-Following Wing Decks
Wing decks on the 96" model flex up 20 degrees and down 15 degrees to follow the terrain, hugging the ground for the smoothest possible cut. Folds to 75" to fit in trailer.
Horizon Technology
Choose the right operating mode for mowing conditions, saving fuel costs while maintaining top-level performance with our Horizon™ Technology.
- Powerful 37 HP Yanmar® Diesel 1642cc Engine
- 96” (243.8cm) Rear Discharge TURBO FORCE® deck
- Mow smarter with Horizon™ Technology that lets you choose the right operating mode for the conditions, saving fuel costs while maintaining top-level performance
- Deluxe suspension seat with iso-mounts to reduce operator fatigue and vibration
Specifications
| Engine | 37 hp* Yanmar® Diesel 1642cc |
| Fuel Capacity | Diesel/12.5 Gal (45.4 L) |
| Cutting Width | 96” (243.8 cm) (Rear Discharge) |
| Air Filter | Heavy-Duty Canister Air Cleaner Air Filtration System with Electronic Vacuum Sensor |
| Anti-Scalp Wheels | 13 Standard |
| Armrests | Standard |
| Blade Tip Speed | 18,200+ ft/min |
| Blade Type | 4 blades at 24.5" length |
| Caster Tires | 15” x 6” – 6” (38.1 x 15.2 x 15.2 cm) Flat-Free Semi-Pneumatic |
| Clutch | Wet Disc |
| Deck Design | 7-Gauge TURBO FORCE® w/ Bull-Nose Bumper |
| Drive System | 17.84 cu in Hydro-Gear HGM-H Motors with 18 cc Kanzaki® Pump |
| Drive Tires | 26" x 12" – 12" (66.0 x 30.5 x 30.5 cm) |
| Engine Horsepower | 37 HP |
| Engine Displacement | 1642cc |
| Foot Operated Height of Cut |
Hydraulic with Rocker Switch |
| Ground Speed | 12.5 mph (20.1 km/h) |
| Height | ROPS Height (Folded) 51" (129.5 cm), ROPS Height (Upright) 71.8" (182.4 cm) |
| Height of Cut | 1.0” – 5.5” (2.5 – 14.0 cm) |
| Hour Meter | Horizon™ Technology |
| Length | 97.38" (247.3 cm) |
| ROPS | Standard |
| Seat | Deluxe Suspension (Iso-Mount, Flip-Up) |
| Spindle Bearings | Maintenance-Free |
| Spindle Housing | 9" (22.9 cm) Diameter Cast Iron, 1" (2.5 cm) Heavy-Duty Spindle Shaft |
| Steering Controls | 1-5/8" (4.1 cm) Dia. Grips; Adjustable, Dampened |
| Weight | 2,650 lbs. (1,202 kg) |
| Width | Deck Clearance Width 102.3" (259.8 cm) |
| Disclaimer | * The gross horsepower of these diesel engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower. **See retailer for warranty details. |