• PH:

    (435) 257-7000 


    8:00 am - 5:00 pm 


    8:00 am - 12:00 pm
Follow Us on Instagram View Our Page

Toro 36" (91 cm) Fixed Deck Gear Drive T-Bar (50 State) (39674)

Double tap to zoom



T-Bar Steering Controls

Exclusive Toro T-Bar steering system is easy to use and ergonomically designed to reduce operator fatigue. Great for tracking in large open spaces and also maneuvering around obstacles. All around an intuitive control system.

Exclusive TURBO FORCE Deck

High-capacity 7/10 gauge TURBO FORCE deck delivers unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Easily handles the most demanding conditions and resists damage from impacts and abrasion.

Rubber Discharge Chute

High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.

Patented Adjustable Baffle

Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.

Smarter design in a bull-nose bumper.

7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4" (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.

Rugged Spindle Assembly

Rigorously tested to ensure that it can survive impacts that would destroy lesser spindles. The cast iron housing, with a massive 9-3/8" (23.8 cm) diameter base, absorbs impact loads and distributes them across a broader area of the robust deck shell. Built with maintenance-free sealed ball bearings.

Extended Life Drive System

Extended life drive system with Husqvarna Peerless 700 series transmission, featuring a 9-spline drive coupler.

A Flat Crisp Cut with Precision Blades

(.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.

  • Exclusive T-Bar steering controls - easy to use and reduces fatigue
  • 36" TURBO FORCE 7-gauge deck
  • 14.5 HP Kawasaki® FS481V 603cc


Engine 14.5 HP* Kawasaki® FS481V 603cc
Fuel Capacity 5 gallons (19 L)
Height of Cut 1" to 4-1/4" in 1/8" increments (2.5 cm to 10.8 cm in 3 mm increments
Number of Blades 2
Starter Recoil
Drive System 5-Speed Transmission
Mulch, Bag, Side Discharge Side-discharge standard
Air Filter 2-Stage Air Cleaner
Adjustable Discharge Standard
Blade Tip Speed 18,500 ft/min (5639 m/min)
Brake System 6" (15 cm) Band Brakes
Caster Tires 9" x 3.50-4" (23 cm x 9 - 10 cm) Flat-free
Deck Design 36" (91.4 cm) TURBO FORCE
Discharge Chute High-performance 5/16" (8 mm) rubber
Drive Tires 13" x 6.50-6" (33 cm x 15.2 - 16.5 cm)
Ground Speed 6.2 mph (10 km/h) fwd; reverse assist
Height 41" (104 cm)
Horsepower 14.5 hp
Length 74" (188 cm)
Spindle Housing Cast iron with 9-3/8" (24 cm) base
Steering Controls T-Bar
Transmission 5-speed gearbox with 9 spline coupler
Width 37.1" (94 cm) with chute up
Weight 460 lbs (208 kg)
Disclaimer *The gross horsepower of this engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.