Toro 5000 Series Rear Discharge 60" (152 cm) 26.5 HP EFI 747cc (72921)

Michelin® X® Tweel® Turf Tires
No air pressure to maintain, no flat tires, no compromises. Get extra long wear life two to three times that of a pneumatic tire at equal tread depth.

7-Gauge, High-Strength Steel
The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.

A Flat Crisp Cut with Precision Blades
(.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.

Deluxe Suspension Seat
Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue.

Smarter design in a bull-nose bumper.
7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4" (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.

Smooth, Powerful Response
The new unitized pump and wheel motor use proven commercial hydraulic components while eliminating hoses and other potential leak points. You'll get a smoother, faster response while enjoying an even more reliable machine.

Operator Information Center
The instrument panel includes a digital hour meter, fuel gauge, and voltage meter, as well as diagnostic indicators for the safety interlock system.

Folding Rollover Protection System ROPS
A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.

Cast Aluminum Spindle
Cools quickly for enhanced durability and performance.

• Engine
  26.5 hp* (20 kw) Kohler® Command Pro EFI 747cc
• Fuel Capacity
  Gas/12 gal (45.4 L)
• Cutting Width
  60" (152.4 cm)
• Adjustable Discharge Baffle
  Standard
• Air Filter
  Heavy-Duty Canister Air Cleaner
• Armrests
  Standard
• Blade Tip Speed
  18,500+ ft/min (5638.8 m/min)
• Blade Type
  .204” (.5 cm) heat-treated steel
• Carrier Frame
  3" x 1.5" x 10 gauge (7.6 cm x 3.8 cm x 10 gauge)
• Caster Tires
  13" X 6.5" – 6" (33 cm x 16.5 cm – 15.2 cm) Flat-Free Semi-Pneumatic
• Clutch
  Electromagnetic
• Cup Holder
  Standard
• Deck Design
  80-Grade 7-gauge 60" (152.4 cm) TURBO FORCE® Rear Discharge w/ bull-nose bumper
• Discharge Chute
  Rubber
• Drive System
  Unitized Pumps 12cc/rev (shock valves) & Wheel Motors (14.6 cir)
• Drive Tires
  Airless radial 24" (60.96 cm) Michelin X Tweel Turf Tires
• Ground Speed
  10 mph forward (16.1 kph)
• Height of Cut
  1 in - 5.5 in (2.5 cm x 14 cm) by .25 in (.6 cm) increments
• Number of Blades
  3
• Hour Meter
  Standard
• Hydraulic Fluid
  Premium synthetic
• Ignition
  Electric
• ROPS
  Folding; standard
• Seat
  Handcrafted deluxe suspension seat with arm rests featuring bullhorn accent
• Spindle Bearings
  Greaseless ball bearings
• Spindle Housing
  9" (22.9 cm) diameter cast aluminum
• Steering Controls
  1-5/8" (4.1 cm) diameter grips; adjustable, dampened
• Weight
  1,271 lbs. (576.5 kg)
• Disclaimer
  *The gross horsepower of these engines was laboratory rated by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.