• PH:

    (435) 257-7000 


    8:00 am - 5:00 pm 


    8:00 am - 12:00 pm
Follow Us on Instagram View Our Page

New Holland ProRotor.3114

Double tap to zoom




For the traditional haymaker, the ProRotor 3114 rotary rake offers a large, 11 ft. diameter rotor, perfectly suited to today’s most common nine and ten foot mowers and mower-conditioners. The single-rotor design allows you to rake individual windrows, or double them up in two passes for the most efficient baling and harvesting possible. Drawbar trailed with a low power requirement hooks up quickly and works efficiently with tractors having as little as 20 PTO hp.

For frequent travel on narrow rural roads, tine arms remove quickly and store away in storage rack. The compact folding also means this rake stores way easily taking up less valuable shed space.


The heart of a rotary rake is the rotor gearbox, that’s why ProRotor rake rotors are sealed and lubricated by oil for reliable and dependable service life.

Practically maintenance free rotor gearboxes do not require daily greasing of the tine arm assemblies so you spend less time greasing and more time raking


ProRotor tine arms are mounted at a tangent placing the tines are in the optimum position gather your hay.

The smooth cam action and specially formed tine arm curve lift the tines quickly as hay is deposited into the windrow, resulting in an even and consistent windrow.

To handle your heaviest crops each tine arm is secured by a through bolt and clamping bolt for high-reliability.


Individual raking tines are uniquely shaped to provide more equal tine spacing improving coverage to reduce missed crop.
With the capacity to handle the heaviest of crops individual tines have three spring coils for flexibility to protect the stubble from inadvertent contact.
Each tine is securely bolted and coils wrap around the tine arm, for extra piece of mind optional tine saver clips are available.


The ProRotor 3114 follows ground contours closely and precisely, supported by four 18 x 8.5-8 flotation tires on oscillating tandem axles, so an accurate tine height is maintained in rolling terrain.

The rear rotor of the ProRotor 3223 articulates in all three dimensions to follow field contours independent of the front rotor. Each rotor hugs the ground and raking more cleanly than similar rakes with fixed rotors. Articulating without complicated pivoting joints and hydraulic cylinders, the rear rotor is supported by four large 18 x 8.5-8 flotation tires on oscillating tandem axles with two additional guide wheels positioned in the front to guide the tines with precision in rolling terrain.

Supported by a tricycle undercarriage with four 16 x 6.5-8 flotation tires, the dual front wheels are positioned close to the tines to lead the rotor controlling tine height precisely and caster to prevent skidding during a tight turns.

For more especially challenging conditions such as pivot irrigation tracks and unexpected holes the optional tandem axle kit provides an extra smooth ride allowing the rotors to follow the terrain closely.

Drawbar trailed a special “J-shaped” hitch pin secures the ProRotor3114 and ProRotor3223 rakes to the tractor. To reduce hay catching on the drawbar this special hitch pin is shorter and secured on the top.

A hydraulic cylinder controls the hitch angle keeping the rotors level as they are raised on headlands. The ram is threaded to provide full range of adjustment for different drawbar heights.

Rotor adjustments are simple and easier than ever so you can rake clean every time. Rotor height adjustments can be made without tools and built in side leveling adjustment ensures your always set properly without rotor base shims or tire pressure adjustments.


Paint Powder Paint
Cutting Width/Discharge 
Crop Delivery Left Side
DIN Width - Sing Swath or Min (m/ft.) 4.2/13.8
DIN Width - Double Swath or Max (m/ft.) -
Length (m/ft.) -
Transport Length (m/ft.) 3.9/12.8
Width (m/ft.) -
Transport Width (m/ft.) 2/6.6
Transport Height w/ arms removed (m/ft.) -
Height (m/ft.) -
Capacity (hph/aph) 4.6/11.4
Weight (kg/lbs.) 570/1257
Rotor Diameter (m/ft.) 3.4/11
Clean Swept Working Width (not noted on supplied tables) (m/ft.) 3/9.8
Cam Track Diameter (mm/in) 260/10.2
Minimum Tractor Requirement 
Power Requirement (kw/hp) 15/20
PTO Speed 540
PTO Type Double Wide Angle CV
Overrunning Clutch NA
Protection Radial Pin Clutch
Tractor Attachment 
Hitch Drawbar
Special Hitch Pin Standard
Rotor Articulation System NA
Num. Rotors 1
Num. Arms / Rotor 11
Num. Tines / Arm 4
Tine Arm Diameter (mm/in) 35/1.4
Tine Arm Attachment to Gearbox 2 bolts
Tine Arm Removal for Transport/Storage Lynch pin
Tine Diameter (mm/in) 9/0.4
Front Swath Board Standard
Rear Swath Board NA
Swath Board Adjustment/Folding Mechanical
Height Adjustment Hyd Lift/Mech Stop
Rotor Headland Clearance (mm/in) 500/19.7
Removable Tine arms/ Folding Guards Standard
Undercarriage Tires/Wheels 18.5x8.5-8 PR6
Axle Tandem
Hyd. Requirements 1 Single Acting
Chassis Tires/Wheels NA
Rear Wheel Steering NA
Max. Turning Angle NA
Transport Lighting Dealer-Installed Option
Transport Safety Chain/Hitch Check Chains Transport Safety Chain
SMV Emblem NR
Transport Lighting Requirement -
Electrical Requirements NA
Operating Speed 
Operational Speed 8-14 k/h / 5-8.5 mph