Call UsNew Holland DuraDisc™ 107M
DuraDisc™ Heavy-Duty Disc Mowers DuraDisc™ 107M
Overview:
You can depend on rugged DuraDisc™ mounted disc mowers to slice through tough conditions and mow smoothly and quickly.
DuraDisc™ 107M - 5 discs - 6’8” cutting width
Features
DURABILITY IS STANDARD
DuraDisc™ heavy-duty disc mowers from New Holland combine fast cutting with trouble-free operation and easy servicing to assure you of the dependable performance you need season after season.
MOWMAX™ DISC CUTTERBAR 3-YEAR FACTORY WARRANTY
New Holland’s MowMax™ disc cutterbar breezes through tough mowing conditions and is backed by three full years of factory warranty so you can cut close with confidence.
QUICKMAX™ KNIFE CHANGE SYSTEM KEEPS YOU SHARP
The QuickMax™ knife change system makes it quick and easy to keep knives sharp for the best cut quality.
CONVENIENTLY MOVE FROM ONE TASK TO THE NEXT
Quick-hitch compatibility on mounted models makes hooking and unhooking the mower from the tractor simple so you can move from mowing to tedding or raking seamlessly.
Specifications
| DuraDisc™ 107M | |
| Cutterbar | |
| Cutting width ft. in. (m) | 6'8" (2.0) |
| Cutting height in. (mm) | 1.25-3.5 (32-89) |
| Cutterbar tilt angle degrees | 0 to -10 |
| Cutterbar operating range degrees | +18 to -32 |
| Breakaway angle degrees | 19 |
| Cutterbar flotation | Vertical adjustable spring |
| Type cutterbar | MowMax™ cutterbar, modular, with individual sealed reservoirs |
| Number of discs | 5 |
| Knives per disc | 2 |
| Disc cutting diameter in. (mm) | 19.7 (500) |
| Disc drive | Bevel gears in sealed modules |
| Disc speed RPM | 3000 |
| Cutterbar gear protection | Std. ShockPRO™: easy replace ShockPRO hub with a partial complement of sacrificial splines |
| Swath width, approx standard* in. (mm) | 80 (2032) |
| Swath width with optional swathboards* in. (mm) | 48 (1219) includes LH & RH swathboards |
| Driveline | |
| Minimum PTO horsepower required hp (kW) | 45 (33.5) |
| Input speed RPM | 540 |
| PTO shaft spline/size required | 6-spline / 1-3/8" |
| Driveline protection | Belt drive to cutter bar |
| Overrunning clutch | |
| Belt tension | Spring-loaded tensioner with adjustment gauge |
| Hydraulics and Hitch | |
| Hydraulic circuits required | One remote |
| Minimum relief pressure required psi (bar) | 1500 (103) |
| Hitch | Category I/II or Category II |
| Dimensions and Weight | |
| Overall width in. (mm) | 138.75 (3524) |
| Overall length in. (mm) | 42.5 (1080) |
| Height - transport position** in. (mm) | 98 (2489) |
| Weight, operating lb. (kg) | 1200 (546) |
| Maximum transport speed | - |
| Tires/wheels | - |